English
| Quantity: | |
|---|---|
FMS dust removal filter bags
MINGKAI
Engineered to excel in the most demanding industrial environments, our FMS Filter Bags (Fluorine-Modified Silicone Filter Bags) offer exceptional resistance to high temperatures, humidity, oil, and corrosive substances. These filter bags are ideal for applications requiring reliable performance under综合恶劣工作环境, such as waste incineration, steel processing, and chemical manufacturing.
Continuous: ≤260°C; Short-term: ≤280°C
Composite fiber + glass fiber base fabric
950 g/m²
3.2±0.3mm
6±20% m³/m²·min @127pa
1.5 million square meters of felt annually
Inspect the FMS filter bag for any signs of damage, such as tears or holes. Ensure compatibility with your filtration system and operating conditions.
Handle the filter bag with care to avoid damage. Install according to manufacturer specifications, ensuring proper tension and sealing to prevent bypass and ensure optimal filtration efficiency.
Gradually increase temperature and airflow to allow the filter bag to condition. Monitor pressure differentials and adjust as needed to ensure stable operation.
Monitor system performance regularly. Conduct visual inspections and replace the filter bag when pressure differentials exceed recommended levels or signs of wear are evident.
Avoid exposing the FMS filter bag to temperatures exceeding its maximum rating of 280°C. Ensure proper ventilation and cooling systems are in place to maintain safe operating temperatures.
Wear appropriate protective clothing, gloves, and respiratory protection when handling filter bags. Avoid inhaling dust or fibers generated during cutting or installation.
While the FMS filter bag has good chemical resistance, prolonged exposure to certain chemicals may degrade performance. Refer to chemical compatibility charts for specific applications.
ISO 9001:2015
CE Certification
GB/T 6006.1
UL 94 V-0
| Product Name | FMS Filter Bag (Fluorine-Modified Silicone Filter Bag) |
|---|---|
| Material | Composite fiber + glass fiber base fabric |
| Gram Weight (g/m²) | 950 |
| Thickness (mm) | 3.2±0.3 |
| Air Permeability (m³/m²·min @127pa) | 6±20% |
| Filtration Wind Speed (m/min) | <0.8 |
| Breaking Strength (Warp, N/5*20cm) | >1600 |
| Breaking Strength (Weft, N/5*20cm) | >1600 |
| Elongation at Break (Warp, %) | <10 |
| Elongation at Break (Weft, %) | <10 |
| Continuous Operating Temp. | ≤260°C |
| Short-term High Temp. | ≤280°C |
| Chemical Substance | Compatibility | Notes |
|---|---|---|
| Acids (dilute) | Good | 长期接触可能需要监测 |
| Acids (concentrated) | Fair | 可能需要特殊处理 |
| Bases | Good | 正常使用条件下稳定 |
| Oxidizing Agents | Poor | 不推荐使用 |
| Organic Solvents | Fair | 视具体溶剂而定 |
图：FMS过滤袋在不同温度和压力条件下的性能表现。请注意，超过280°C的温度可能会导致材料性能下降。
